RG Nu Gundam #3 - Weapon

Build process of RG RX-93 Nu Gundam Note #3, still a long way to go...😅

RG 1/144 Nu Gundam - Weapon Build Process and Demo

Making of Weapon Light Effect
- Beam Saber
- Hyper Bazooka
- Beam Rifle

Build Process and Demo Video

Beam Saber

- Two set of Beam Saber are build with SMD LEDs, and connect in series with a small resistor.  The connectors are build by jumper

Hyper Bazooka

- The light effect just take the same design from my previous work of Gundam Unicorn.  However, the actual design of hyper bazooka is rocket launcher which the presentation is not really correct.

- 4 x WS2812B-2020 SMD full color LEDs are used for represent the rotating type light effect.

- A microswitch is used for for length expansion detect which the status will reflect to Aim LED.  RED color represent normal length and GREEN represent of length expanded.

Beam Rifle

- It is build by single WS2812B for the fire light effect and single 0402 LED on the front.

- A microswitch is used as the rifle trigger.

RG 1/144 RX-93 Nu Gundam - Weapon Demo

武器光效製作，當中包括：

- Beam Saber

- Hyper Bazooka

- Beam Rifle

Beam Saber

- 主要用0603及0402 LED 製作，連接用的部份是用jump改造

Hyper Bazooka

- 重用了Gundam Unicorn的Hyper Bazooka光效設計，可是Nn 的Hyper Bazooka設定是火箭炮，其實製作上是有點錯誤。

- 用了4棵WS2812B緊貼一起製作，營造迴旋光的效果。

- 微動開關是用作炮身長度檢查，並反映於準星LED顏色，平常會用紅色，延長便轉為綠色。

Beam Rifle

- 1棵WS2812B製作槍口光效，並1棵0402 LED 作前方光效。

- 微動開關是用作扳機。