關注頸椎 – STAR WARS - Death Star II
Bandai Death Star II 模型製作電改，造型參照亞特拉斯雕塑
✅光效及聲效
✅MP3 Player
✅紅外線遙控
✅溫度偵察
✅3 minute timer
Video Demo
Death Star II
Death Star LED and Audio Demo
Death Star II - Thermistor Demo
Death Star - 3 minute timer Demo - English
Death Star - 3 minute timer Demo - Chinese
白兵
- 造型來自拿坡里國立考古博物館雕塑
- 改自杯緣子玩具
- 先將手腳切開，並重新組合，再微調至近似設定
- 主色為光澤白色，再噴透明光油
平台
- 地台造型同樣參考雕塑
- 以膠板製作3cm直徑圓形地台
- 用~400號砂紙貼上模仿石面，再噴500底灰並油上少量白色
- mini-USB 只作供電用途，以銅管及膠管製作插頭和插座
- 插頭穿過白兵從背部伸出
- 由8棵WS2812B 組成
- (7 or 8 ?) 參考多篇內容求證，Death Star I 是外圍8支而Death Star II 是外圍7支而第8支處於中央
 |
| Death Star I |
 |
| Death Star II |
- 為加點溫和變化，光效設計成隨溫度轉變
- 先內部挖空，用原子筆頭透明部分改造
- 頂部用了熱敏電阻
- 內核部份光效設計成由紅轉成藍色，現時的程式寫的範圍以香港作參考為(15ºC-30ºC)
- 因期望做到可安裝拆及無縫效果，因此切割外殼再整合
- 內部多處放置了LED，主要是0603 與0402 package
- 鑽孔需要0.3mm內效果才較好看，多而太煩所以改為鋸薄坑紋，這樣範圍較廣而可做到約0.3mm闊，效果不錯。
- 電改部份，今次用了Arduino Pro Mini，藏於正面大空間內
- 音效仍是用了dfplayer，另加熱敏電阻及紅外線接收零件
- 插座用銅管及膠管製作
Continue for English....
Be Aware of Atlas – STAR WARS - Death Star II
✅Light and Sound effect
✅MP3 Player
✅InfraRED remote control
✅Temperature sensor
✅3 minute timer
Stormtrooper
- Concept
from the Atlas Farnese sculpture at the Naples National Archaeological Museum
- Modified
by Fuchiko toy
- Cut
both legs and arms then reassemble again according to figure design
- Mainly
gloss white color with gloss clear coating
Platform
- The
shape of platform is also reference to the sculpture
- Setup
by 3cm diameter plastic plate
- Covered
with #400 sandpaper to pretend the raw surface, then coat with #500 gray primer
and small amount of flat white color
Death Star Superlaser
- Built
by 8 x WS2812B
- (7
or 8?) after reference to many related articles, The Superlaser of Death Star I
is surrounded by 8 x lasers while Death Star II is surrounded by 7 and the 8th
is located at Center
Death Star Internal
- Give
some fancy gimmick and just want to give some soft effect, the LED effect is
designed to follow with temperature change.
- Cut
the core area and use recreated by ball pen transparent parts
- The
thermistor is setup on the topmost area of the Death Star II
- The
core is designed with ability to color change from Red to Blue, which
programmed with reference to HK temperature range of 15ºC-30ºC
Outer shell
- Target
the outer shell to be attach/detachable and seamless surface as possible,
therefore they are cut by panel line and reassemble again
LED
- LED
distributed internally and major package are SMD 0603 and SMD 0402
- 0.3mm
diameter holes is require for a better view but that take quite much effect to
build, several narrow gaps width of ~0.3mm were made. That still look acceptable
Micro Controller
- Arduino
Pro Mini is used which located in the large space at the front
- Sound
effect is using dfplayer, with addition of thermistor for temperature sensor
and infrared component for remote control
- For the power socket, it is made by copper tube together with plastic tube
沒有留言:
發佈留言