網頁

2021年2月14日星期日

RG Nu Gundam #1 - Fin Funnel

Build process of RG RX-93 Nu Gundam Note #1, still a long way to go...😅

有晚上,有早晨,這是第一日。
感受到衪如何看為美好。

This is the first day
Just feel how he saw that it was good

Overview :
  • Center rotate light effect
  • Main Stream running LEDs light effect
  • Surrounding Fade-in/out and Flash light effect

Parts :
  • Center, built by 4 x WS2812B addressable fullcolor RGB LEDs
  • Main Stream, built by 6 x WS2812B addressable fullcolor RGB LEDs
  • Surrounding, built by 0402 & 0603 White LEDs (7 x for Top and 5 x for Bottom)
  • Attiny85 microcontroller, I2C Slave
  • Micro Connectors
...





Video Demo



Build Process

For each Fin Funnel :
  • Open all surrounding, 80 per unit
  • Cut the main stream line of upper half

Connector
  • Modified by micro connector

Center LEDs
  • 4 x WS2812B
  • A microswitch is used for selection of normal operation and Attiny85 programming

Main Stream LEDs and Base Unit
  • Together with Strong Magnet for Power Supply
  • First Layer Completed, covered by Tin foil
  • Base unit by Arduino Nano with I2C Master configuration

Surrounding LEDs
  • White 0603 & 0402 LEDs used
  • Magnetic pole selection

Bottom Half LEDs
  • Mainly 0603 LEDs and 0402 at the bottom most
  • The junction point connection cable is cut by flex cable

Final Effect

Thank you for watching

3 則留言:

  1. 您好~
    我自己也有用0603 LED 為OO Raiser 增添一些光影特效
    目前卡在連接器太大了,塞不進去
    冒昧的請問版主,能否跟您詢問您使用的 Micro Connector 的型號嗎?
    謝謝您。

    回覆刪除
    回覆
    1. 我找的是內地品牌,其型號是SGDBM-05-8P-H30,SGDBF-05-8P-H30 (Male and Female, 0.5mm pitch, 8 pins, 3mm height),但網上似難以用型號搜尋得到,可試搜尋"板對板連接器","Board to Board Connector"會有相關產品。

      刪除
    2. 用關鍵字"板對板連接器"有找到了,
      感謝您

      刪除